Indicator

WASP – 7300

WASP -7300 is our latest weight indicator cum intelligent terminal for weigh bridge application. It has many user friendly and sophisticated features, which makes it much more advance than the regular indicators.

Main Features:
• Wi-Fi facility (Weight Display on wireless)
• USB port for Keyboard / Pen drive facility
• 2 lac memory records
• SMS facility
• 10 Ticket entry
• Coding facility (100 codes for 4 entries)
• Field Programmable Pre-printed tickets
• Time Report Facility
• Vehicle- wise working
• Multiple password for operation
• LCD with backlight control & LED with brightness control

Technical Specification:
• Processor - 32bit Processor • Processor clock frequency - 50 Mhz
• Real time clock - On board battery backed RTC.
• Power supply - SMPS power supply
• Input Voltage - 90V to 270V AC @ 50Hz
• A/D converter - 24 Bit Sigma Delta type
• Load cell excitation - 8V DC, Can drive up-to 12 load Cells of 350 ohms each
• Serial Port - RS-232 Serial

Protection:
• 2.5A fuse for input AC mains
• Input line filter for EMI and RFI suppression.
• Spike suppressor for input transients.
• Opto-isolation of signals and l/Os for high immunity from electrical noise

WASP D400 (With USB Port)

Now days it is very difficult to find computers with RS-232 port because most of the computers are equipped with USB port. Keeping this problem in the mind, we have developed a digitizer with USB port for computer interfacing. This new Digitizer WASP - D400 will eliminate the hazels of RS-232 port.

Main Features:
• Two Communication Ports
• Password Security
• Three Step Calibration
• Smart Calibration
• Flicker Test
• Serial Port Testing

Technical Specification:
• Microprocessor - 32 bit Processor
• Processor Clock Frequency - 50 MHz
• Power Supply - SMPS with EMI/RFI filter and Spike Suppresser
• A/D Converter - Sigma Delta Type 24 Bit ADC
• Conversion Speed - Internal 25 samples per sec
• Load Cell Excitation - 8V DC with current capability to drive up to 12 load cells of 350 ohms input resistance.
• Signal Sensitivity - 1.0 micro volt per division of Weight (unit weight).
• Key Board - 4 Key or optional 16 Key calibrations keyboard
• Display - 6-digit red 7 Segment LED Display for weight display and other parameters
• Remote Display Port - To connect optional 1/2inch, 1inch, 2.3inch or 4inch bright red LED display
• Serial port-1 - Isolated 9 pin type RS-232 serial port is provided for computer interfacing or driving remote display
• Serial port-2 - Isolated USB device port for communication is provided for computer interfacing or driving remote display
• Indications - Buzzer for fault and data entry
• Fuse - F1 fuse 2.5 ampere for AC power in.
• Protection - RFI/EMI filter for input power, Spike Suppressor for input transients

WASP – WS131 (Alpha numeric digitizer cum intelligent terminal with “graphical LCD”)

WASP – WS131 is our latest weight indicator cum intelligent terminal for weigh bridge application. It has many user friendly and sophisticated features, which makes it much more advance than the regular indicators.

Benefits:
• Better look & Visibility
• Easy to read through large and brighter display in day time also
• Editing option of ticket entries before saving saves lot of time and effort